Pure white high brightness Glass t8 Led Tube Light For Airport
1. 2835 SMD LEDs with high luminous efficiency > 100lm/W.T8 size
shape with G13 dual pins.
2. Perfect light quality no-glare design, can replace traditional
fluorescent tube light.
3. Universal power input range of 85~265 VAC.
4. The color temperature follows ANSI C78.337 Standard.
5. Optimum light uniformity and high color rendering index equal or
above 80 Ra.
6. Overpower, short and open circuit protected.
7. NO noise, NO flicker, NO UV and IR.
8.Mercury-free and RoHS compliant.
The commercial application place where need high lux level but soft
can clear light quality,
such as big shopping mall, hospital, office, factory, school,
◆ high power LED source with low attenuation;
◆ Low power consumption, highly efficiency, highly antistatic;
◆ saving energy and protection environment;
◆ No fluorescent flickering;
◆ No RF interference, no buzzing noise;
◆ No coating falling off, color change, anti back flow;
◆ Blue-ray resistance without human hazard and provide eye
◆ CE/ROHS approval.
Light Source Test Report
◆ LED fluorescent tube can be used in the traditional T8, T10 stents.
(just) the starter off;
◆ LED fluorescent tube must use the correct voltage according to
◆ Do not open the led tube by yourself;
◆ We recommend you remove the inductive ballast, for indoor use;
◆ Such led tube cannot replace emergency light
◆ We recommend that the suitable working temperature should be -20˚C
~ + 40˚C for our led tube, if exceed this range, will bring bad situation for product
This product performance is being improved unceasingly, like has
the change, not separate
informs even slightly.