T8 led tube lights replacement 25000hr Lift time For Factories
1. Perfect light quality design, system efficacy > 100lm/W , can
replace traditional fluorescent tube light.
2. Very even light output, no-glare design.
3. 85~265 VAC Universal power input range
4. Very nice design, high quality glass material body.
5. Environmental friendly. RoHs Compliant
6. The color temperature follows ANSI C78.337 Standard.
The commercial application place where need high lux level but soft
can clear light quality,
such as big shopping mall, hospital, office, factory, school,
Light Source Test Report
Led tube could be installed directly to replace traditional tube
for the traditional T8,T10 fixtures (Just take off the Starter is
- Led tube must work with the correct voltage as the
- Do not open the led tube by yourself.
- We recommend you remove the inductive ballast, for indoor use.
- Such led tube cannot replace emergency light
- We recommend that the suitable working temperature should be -20˚C
~ + 40˚C for our led tube, if exceed this range, will bring bad
situation for product lifetime.
- The product installation & maintenance should be operated by
Remark:This product performance is being improved unceasingly, like
has the change, not separate informs even slightly.
1 high power LED source with low attenuation,
2 Low power consumption, highly efficiency, highly antistatic,
3 saving energy and protection environment,
4 long lifespan(>50.000hrs)
5 No fluorescent flickering
6 No RF interference, no buzzing noise.
7 Easy in stallation
8 No dangerous of glass broken
9 Heat resistance up to 380℃
10 No coating falling off, color change, anti back flow;
12 Blue-ray resistance without human hazard and provide eye
13 CE/ETL & ROHS approval